Linuxtipstricks – Just another /linux/blog

May 16, 2009

How to manage Trash can or Recycle bin in Linux Desktop graphic environment

Filed under: user tipstricks — Antonio Portuesi @ 7:31 pm
Tags: , , , , , , , , , , ,

In every modern linux distros (OpenSuSE, Ubuntu, Mandriva, …) we use the graphic environment (GUI) almost all day.

Linux GUIs as Gnome, KDE or Enlightment, have a trash can where your erased files go when you delete them from a Desktop utility.

Now if you want to get rid of that from your console, you have to know that the trash can is only another folder in the file system structure, as you can figure out, and it is located at:

user@pc:~$ $HOME/.Trash

so you can send any file to Trash just moving them to there, as an example, lets suppose you have a file in your home directory called readme.txt and want to move it to the trash can (recycle bin if you prefer)

user@pc:~$ mv $HOME/readme.txt $HOME/.Trash/

Whenever you may want to restore it, just move the same file to the original location or to any other you like, just like the following:

user@pc:~$ mv $HOME/.Trash/readme.txt $HOME/

and you are done.

If you want to clean your trash can/recycle bin, just type this line

user@pc:~$ rm -rf $HOME/.Trash/*

and press enter in your keyboard.

That’s all!

Advertisements

February 21, 2009

How to finding out which directory is the largest on your device

Filed under: user tipstricks — Antonio Portuesi @ 4:43 pm
Tags: , , , , , , , , ,

How many time did you try to know exactly which is the living-to-eat-some-space directory on your hard drive?

No matter what system/distro you have, that could be a issue for you as a faithful user of Ubuntu, OpenSuSE, Slackware, Gentoo and so on.

Either you have a unique partition or a multi partition system the following code might be useful for your purpose.

user@pc:~$ du -S | sort -n

Have a try and reclaim your free space!

December 13, 2008

How to find out who has a file open in Linux

Filed under: user tipstricks — Antonio Portuesi @ 1:28 pm
Tags: , , , , , , , , ,

How often do mounts and umounts operations fail because you cannot determine who or what is using that device? How many times can you not eject a DVD because someone or something has it still open? How many times have you experienced a file manager that keeps a directory open even after you have navigated out of that directory and clicked the refresh button several times?

Let’s use the fuser tool to find out soething useful for our purpose.

Example 1:

user@pc:~$ fuser -mu /home

/home:                5525c(user)  5601m(user)  5607c(user)  5614c(user)  5685c(user)  5739c(user)  5740c(user)  5742c(user)  5743cm(user)  5744cm(user)  5766m(user)  5778m(user)  5789c(user)  5795c(user)  5799c(user)  5801c(user)  5803cm(user)  5805cm(user)  5806m(user)  5921m(user)  6001cm(user)  6005cm(user)  6076(user)  9391cm(user)  9395c(user)

Example 2:

user@pc:~$ fuser -mu /media

/media:               5514rce(user)  5525re(user)  5586rce(user)  5587rce(user)  5593rce(user)  5595rce(user)  5601rce(user)  5604rce(user)  5607re(user)  5613rce(user)  5614re(user)  5617rce(user)  5685re(user)  5738rce(user)  5739re(user)  5740re(user)  5742re(user)  5743re(user)  5744re(user)  5747rce(user)  5757rce(user)  5759rce(user)  5762rce(user)  5766rce(user)  5772rce(user)  5778rce(user)  5789re(user)  5795re(user)  5799re(user)  5801re(user)  5803re(user)  5805re(user)  5806rce(user)  5811rce(user)  5921rce(user)  6001re(user)  6005re(user)  6032rce(user)  6071rce(user)  6076rce(user)  8712rce(user)  9391re(user)  9395re(user)

Now you get the owner and the related process id. For rurther information about a listed process you can research deeper using ps ax.

November 1, 2008

How to check if Linux kernel supports IPv6

Filed under: user tipstricks — Antonio Portuesi @ 3:35 pm
Tags: , , , , , , , , , ,

As we know, IPv6 addresses are classified into three types:

  1. Unicast addresses: A unicast address identifies a single network interface. The protocol delivers packets sent to a unicast address to that specific interface. Unicast IPv6 addresses can have a scope which is reflected in more specific address names: global unicast address, link-local address, and unique local unicast address.
  2. Anycast addresses: An anycast address is assigned to a group of interfaces, usually belonging to different nodes. A packet sent to an anycast address is delivered to just one of the member interfaces, typically the “nearest” according to the routing protocol’s choice of distance. Anycast addresses cannot be identified easily: they have the structure of normal unicast addresses, and differ only by being injected into the routing protocol at multiple points in the network.
  3. Multicast addresses: A multicast address is also assigned to a set of interfaces that typically belong to different nodes. A packet that is sent to a multicast address is delivered to all interfaces identified by that address. Multicast addresses begin with the first octet being one (1) bits, i.e., they have prefix FF00::/8. The four least-significant bits of the second address octet identify the address scope, i.e. the span over which the multicast address is propagated.

What if I would like to start using IPv6 on a Linux system? How could I test, whether my Linux server system is IPv6 ready or not? If not, how could I enable IPv6 support under Ubuntu, OpenSuSE, Mandriva, Gentoo, Fedora and so on?

Many people know that Linux kernel has IPv6 support since 1996 release. All you need to do is compile kernel with IPv6 networking support. However, there is a so easy way to find out if Linux kernel is already compiled with IPv6 settings.

Check if the current running kernel supports IPv6 taking a look at your /proc-file-system:

user@pc:~$ cat /proc/net/if_inet6

Following lines should be shown:

user@pc:~$ 00000000000000000000000000000001 01 80 10 80 lo
user@pc:~$ fe800000000000000219d1fffe2abaa8 02 40 20 80 ath0

ipv6 module has IPv6 protocol stack for Linux. If above cat command fails the IPv6 module is not loaded.

Just type the following command:

user@pc:~$ sudo modprobe ipv6

Now to test again if all is ok write on your console:

user@pc:~$ lsmod | grep ipv6

that generates an output like that:

user@pc:~$ ipv6 411425 18

Now your system is ready for IPv6 jobs.

October 19, 2008

How to restore GRUB in your MBR if Windows changed it

Filed under: user tipstricks — Antonio Portuesi @ 7:29 pm
Tags: , , , , , , , , , ,

Once upon a time it was a GRUB (GRand Unified Bootloader) menu showing up itself after a normal Bios POST…

Then you said: Why should I do not another Windows release test?

It is over, during the last setup step Windows installer overwrite the MBR (Master Boot Record) and you cannot make a OS choice at boot time anymore.

And now?

Before you start please note that if you are not confident in what you are doing or in repairing or recovering from the above listed process, then do not step to the outlined instructions. Working with MBR is easy in almost all situations, this process does not carry out data loss, but there still exists a (however minimal) risk about that, so you should back up your data before attempting to modify your hard disk settings.

I cannot help you troubleshoot problems you could have following this tutorial.

Follow these steps, get back the control and come back a dual boot user.

First of all clear your mind and do not forget that this method puts GRUB back on the MBR of the hard drive instead of in the root partition. This is good for most of you, but not if you already have an alternative boot manager as Boot Magic or System Commander or Acronis OS Selector.

If you have installed GRUB into the root partition instead of the MBR, the commands are a little different. Here there is the procedure:

Boot from a Live CD, (Ubuntu, OpenSuSE, Mandriva, Gentoo, Fedora and so on)

Open a terminal. Go on as SuperUser (or use sudo command) and enter root password as requested.

user@domain:~$ sudo grub
user@domain:~$ password for user:

Then type:

grub> find /boot/grub/stage1

You will get a system response like “(hd0)” or in my case “(hd0,6)”

grub> find /boot/grub/stage1
(hd0,6)

Go on typing:

grub> root (hd0,6)

and:

grub> setup (hd0,6)

Pay attention here and stay focused: other troubleshoot instructions suggest you to type “(hd0)”, and that is good if you want to write GRUB to the MBR and not on the root partition. So this is up to you.

The final command let you exit the grub shell:

grub> quit

Now reboot the system and remove the bootable live media.

user@domain:~$ sudo reboot

I hope this guide will help you to gain control of you boot procedure.

October 5, 2008

How to create a separate home partition in Linux (Ubuntu, OpenSuSE, Mandriva, Gentoo, Fedora and so on)

Filed under: user tipstricks — Antonio Portuesi @ 4:26 pm
Tags: , , , , , , , , , , , ,

This simple guide is just another way to make a separate /home partition if you already installed Linux with a embedded /home partition (aka /home folder inside your / partition).

Getting a separate /home partition allows you to reinstall your Linux distro (Ubuntu, OpenSuSE, Mandriva, Gentoo, Fedora and so on) and retain all your personal files and settings. This is for your convenience and you should seriously think on it as soon as possible if time really matters to you. Do not forget to run a complete back up of your data before go trough.

You are strongly encouraged to use a self booting live CD for this process, for those reasons:

a) In order to resize your existing root partition, it needs to be unmounted. The only way to unmount it is for it not to be in use, which means you cannot boot to your regular linux environment while resizing it so you need a external and autonomous system as a live CD or a bootable USB device.
b) If you damage your linux system by accident, you can use for sure the live CD to restore your old settings and, in a very bad situation, at least recover your important data.

Before you start please note that if you are not confident in what you are doing or in repairing or recovering from the above listed process, then do not step to the outlined instructions. Creating a separate /home partition involves resizing at least one existing partition. In almost all situations, the resizing process of partitions does not carry out data loss, but there still exists a (however minimal) risk of data loss, so you should back up your data before attempting to modify your hard disk partitions.

I cannot help you troubleshoot problems you could have following this tutorial.

Now, after you made the new target partition will host your /home open a the terminal, I’m going to mount /dev/sda1 and /dev/sda2 by pasting in these commands (please remember to change the partition device names to the ones appropriate for your setup)

sudo mkdir /first
sudo mkdir /second
sudo mount -t ext3 /dev/sda1 /first
sudo mount -t ext3 /dev/sda2 /second

Now we are going to copy all the content from the original /home to the new target partition…

cd /first/home
find . -depth -print0 | cpio --null --sparse -pvd /second/

…and to get a backup copy of /home too, useful in a troubleshoot process:

sudo mv /first/home /first/home_backup
sudo mkdir /first/home

Right now, after you made a backup copy of fstab, we will specify how the system should use the brand new partition as /home:

sudo cp /first/etc/fstab /first/etc/fstab_backup

sudo gedit /first/etc/fstab (if you are a Gnome lover) or

sudo kedit /first/etc/fstab (if you are a KDE lover).

The /etc/fstab should be shown in the text editor.

Add the next line at the end of the file and remember to double check the right name of your partition before save the file and close the editor:

/dev/sda2 /home ext3 nodev,nosuid 0 2

In order to avoid error messages after reboot with the new /home partition you should set the proper ownership typing:

sudo chown user_managed:user_managed /home/user_managed -R

If everything is ok and you are running a system without problems you could delete the old /home directory and get some free space on your disk:

sudo rm -rf /home_backup

If you incur some issue you can restore the old /home by changing back the fstab removing the line you added before as described above.

Create a free website or blog at WordPress.com.